Flavel Renoir Traditional Outset Living Flame Effect Gas Fire

Flavel Renoir Traditional Outset Living Flame Effect Gas Fire is brilliantly designed and comes with a traditional hearth mounted glass-fronted. It can be selected based on your taste, like the electronic side or fully remote control. It comes in two stunning finishes, including a black and bronze finish with a coal fuel effect. The customers safety is taken into account as there is an inbuilt AirWatch system and flame supervision device.

• Traditional hearth-mounted glass-fronted gas fire
• Choice of Electronic side or complete Remote control [Optional]
• Full-depth outset gas fire
• Type of heat: Radiant and convected
• Fireback option: Plain black
• It can be used with Brick Chimney - Class 1, Pre-Fabricated flue - Class 2 or Pre-Cast flue
• Size [mm]: 684mm x 324mm x 703mm [Width x Depth x Height]
• Size [cm]: 68.4cm x 32.4cm x 70.3cm [Width x Depth x Height]
• For complete size details, please refer to the technical drawing
• Builders opening sizes:
• Minimum height: 500mm (50cm) and Maximum height: 650mm (65cm)
• Minimum width: 305mm (30.5cm) and Maximum width: 440mm (44cm)
• Specification of Electronic Side Control:
• Both ignition and heat are controlled by a single rotary motion to light the fire. This is easy to use control. Requires an AA battery
• Useful energy efficiency: 78.7%
• Energy efficiency class: E
• Direct heat output: 4.2kW
• Specification of Remote Control:
• The remote control handset is used to light the fire as well as adjust the flame height and heat output
• Useful energy efficiency: 81.6%
• Energy efficiency class : D
• Direct heat output: 4.4kW
• Specification of Brick Chimney - Class 1:
• Apart from products designed for “no chimney” applications, all Flavel products will fit brick chimneys. They are easily recognisable by a chimney stack with an accompanying terracotta pot or gas terminal
• Specification of Pre-Fabricated Flue - Class 2:
• Pre-fabricated flues are easily identifiable by a metal flue and terminal on the roof and a metal flue box behind the fire
• Specification of Pre-Cast flue:
• Pre-cast flues can be identified by a ridge vent or metal flue tube and terminal on the roof. Constructed from concrete or clay blocks, they form a rectangular section flue. All Flavel fires featuring this icon are only suitable for Pre-Cast flues conforming to BS EN 1858