Bristan Value Club Dual Flow Chrome Basin Mixer Tap With Pop Up Waste

D.E.DONOVAN Asked :

DIMENSION OF OUTSIDE EDGE OF HOT TAP TO OUTSIDE EDGE OF COLD TAP.

Answered By QS Team

The widest point's measurement across the handles of the tap is approximately 154 mm.

Was this answer helpful?

Stuart Asked :

Is the Bristan club monobloc basin mixer suitable for unbalanced water pressures, low pressure hot and high pressure cold?

Answered By QS Team

This tap would ideally require balanced hot and cold pressures, however it should work as long as the hot is not less than 0.2 bar.

Was this answer helpful?

Anand Asked :

I have a bathroom washbasin with a mains cold water supply and a gravity-fed system hot water supply. Previously I had two separate taps that worked fine. Now having difficulty with mixers as the hot water flow gets reduced. I am told that I should go for a dual flow-type mixer valve - is the Bristan Value Club Dual Flow Basin Mixer Tap With Pop Up Waste - VAC DFBAS C MT a suitable product? Is there a separate flow of hot water through the tap, and will there be a good hot water flow?

Answered By QS Team

We can confirm the basin mixer is Dual Flow meaning there are separate feeds for the hot and cold supplies. For more information, please download the installation PDF file from the Additional Info tab of the product for VAC DFBAS C MT, or you can download it directly from here.

Was this answer helpful?

Richard Asked :

Is this tap a true dual flow item, i.e. mixes only at the end of the spout, not in the tap's body? This is important as I don't want the mains cold water going back up the hot pipe! Thank you

Answered By QS Team

We can confirm the VAC DF BAS C MT is a Dual Flow product, and the water would come out of the tap in two separate streams and will not mix in the tap's spout.

Was this answer helpful?

2 0