Warmup 200W Electric Underfloor Heating StickyMat System

If your accessories are made by Warm Up, you can use them irresistibly for years without any hassles. The Electric Underfloor Heating Sticky Mat System features the thinnest dual fluoropolymer coated heating wire, and therefore, doesn't obstruct in any way. It comes with sturdy glass fibre mesh and super-sticky double-sided tape for secure installation and can also be repositioned if required. It consists of a thin evenly spaced wire, taped to a glass fibre mesh with adhesive, for quick and secure installation. Its simply perfect for all kinds of projects and comes with a Safety Net Installation Guarantee that allows for replacement from the manufacturer in case of accidental damage during installation.

• Ideal for regular-shaped rooms, where the 0.5m wide mats can be rolled out across the floor in parallel runs
• 200W/ m2 – power variant is best suited for rooms or areas with a high heat loss, such as conservatories. Be sure to carry out a heat-loss calculation to assess the heating requirements of the room. This is especially the case if you consider using underfloor heating as a primary heat source under tiles in a high heat-loss area
• An electric underfloor heating mat and cable system with pressure-sensitive adhesive for the fastest installation
• Floor-type: Ceramic floors and stone floors
• Room type: Large areas and regular shape
• Build type: Refurb and new build
• Thermostat not included - sold separately
• Installation Manual And Floor section PDF provided in the technical tab
• Available in 17 other sizes, optional
• Optional Products: Thermostat and Insulation Boards
• Technical Data:
• Operating voltage: 220 - 240v: 50Hz
• Ip rating: IPX7
• Width: 500mm
• Mat thickness: 3mm
• Cable thickness: 1.8mm
• Output rating: 200w/m2
• Inner/outer insulation: Advanced fluoropolymer [ETFE]
• Min. installation temp: 5°c
• Connection: 3m long “Cold tail” connection
• Key Benefits:
• No increase in floor levels: The thinnest dual fluoropolymer coated heating wire – less than 1.8 mm
• Durability: Sturdy glass fibre mesh with pressure-sensitive adhesive for the fastest and most secure installation
• Quick Installation: Roll out the mat with pre-spaced wire

Only underfloor heating company whose products are European Compliant, CE marked and accredited by BEAB, cUL, CSA, FIMKO, SEMKO and UL.
Please Note: Read the manual PDF before attempting to install this heater. Incorrect installation could damage the heater and will invalidate your warranty.