Warmup MSTAT Manual Thermostat

The Warm Up Manual Thermostat makes regulating your house temperature so easy. You can operate it by a simple on/off switch and keep it at your desired temperature. It is ideal for rooms without a set heating program and where you want fast and easy control. This thermostat manually controls underfloor heating inside your home and can be flush mounted in standard sockets. The range of temperature is from 5 to 35 degrees centigrade, and a floor probe enables precise temperature control. It is suitably backed by 3 years of manufacturer warranty.

• Perfect for rooms which do not benefit from or require a set heating program, where you want fast and simple control of your heating system
• Concealed heating indicator
• Adjustable floor temperature limit
• Floor and air sensors ensure precise control
• Sensors can be set as Air, floor or Air with a floor limit
• Automatically enters ‘safe mode’ if sensor failure detected
• Installation Manual PDF provided in the technical tab
• Key Features:
• Dual sensor: Air and floor temperature control
• Flush mounting: MSTAT depth allows flush mount in standard socket
• Temperature regulation: From 5 to 35 degrees
• 16A switching capability: MSTAT manual thermostat’s 16A switching capability, 3,600W at 230V, is suitable for central heating, hydronic and electric underfloor heating demands
• Technical Specification:
• Input voltage: 230V ± 10% at 50Hz
• Max load: 16A [3680W]
• Size [mm]: 86mm x 86mm x 50mm [Height x Width x Depth]
• Size [cm]: 8.6cm x 8.6cm x 5cm [Height x Width x Depth]
• Temperature range: +5°C to +35°C
• Floor limit temperature: +27°C
• Safe mode: 2 minutes on, 2 minutes off, 50% duty
• Sensors: Air and Floor
• Sensor type: NTC10K 3m LONG [can be extended to 50m]
• Heating indication: Concealed LED
• IP rating: IP40
• Insulation class: II
• Er-P class: I
• Installation depth: 35mm Back Box
• Compatibility: Electric underfloor, Hydronic underfloor, and Central heating system
• Standards: EN60730-1 and EN60730-2-9