Menu
Rate this Item.:
Submit Your Questions 4 Questions Answered
Have a question about this item? Ask our technical team. We aim to reply within 72 hours.
Jill Asked :This says that the width is 1000 mm but that the door opening is 555 mm and the panel width is 149 mm. That only adds up to 704 mm, so I am a bit confused. On the 1000 mm width product, is the panel bigger? I was hoping it would be at least 400 mm.
The breakdown of the width of each component is as follows: The wall profile is adjustable from 56-86mm; The inline panel is 149mm; The door is 690mm; The wall profile is adjustable from 45-75mm; The total measurement is adjustable from 940-1000m.
Jon Asked :How are the door and frame sealed to an enclosure wall and the shower tray?
Please refer to the attached installation instructions PDF file to assist with your enquiry.
Celia Asked :I have a shower tray with an upstand/splashguard, which projects 1.5 cm above the top of the shower tray. Currently, there is a sliding shower door, the bottom frame of which is 3 cm high. I want to replace it with a Pivot door, but most have very little or no frame at the bottom, allowing the door to open over the upstand. Does the Lakes Classic LKVP100S have a deep frame at the bottom, and would this be sufficient for my purpose?
The Lakes Classic LKVP100S has a horizontal rail of about 43.5mm high.
Margaret Asked :Can this pivot door be used with a shower tray with upstands?
Yes, this pivot door can be used with upstand shower trays.
We will soon verify the details and add your rating appropriately.