Geberit Sigma30 Urinal Flush Control With Electronic Flush Actuation

The Geberit Sigma30 Urinal Electronic Flush Actuation is made from die-cast zinc and operates via mains connection or battery. It features a reliable IR distance detection and self-adjust IR sensor. Setting options include flush time and a water-saving hybrid mode. The flush volume can be reduced to 0.5 L per flush for additional water-saving capabilities. It is compatible with automatic flush actuation of urinals and for with Geberit frames for urinal with front actuation.

• Available flush plate variant: Mains operated and Battery powered
• Choice of five different finishes available [Optional]
• Size [mm]: 130mm x 130mm [Width x Height]
• Size [cm]: 13cm x 13cm [Width x Height]
• Thickness: 8mm (0.8cm)
• Cover plate with securing bar
• The water-saving hybrid mode can be set
• Flush time can be set
• Flush time can be set manually
• Adjustable interval flush
• Pre-flush can be set
• Can be switched to operation with covered urinal
• Functions can be set and queried with the Geberit Service Handy
• Flush actuation can be deactivated via Geberit Clean Handy
• Flush volume can be reduced to 0.5 l per flush with regulating screw of an installation set
• Protection degree IP45
• Power consumption < 0.5 W
• Flow pressure 1-8 bar
• Maximum test pressure, water 16 bar
• Maximum test pressure, air / inert gas 3 bar
• Relative humidity < 100 %
• Maximum operating temperature, water 30 °C
• Flow rate at 1 bar without flow limiter 0.3 l/s
• Flow rate at 1 bar with flow limiter 0.18 l/s
• Calculated flow rate 0.22 l/s
• Minimum flow pressure for calculated flow rate - 1 bar
• Interval flush, adjustment range 1-168 h
• Interval flush, factory setting 24 h
• Interval flush time, adjustment range 3-180 s
• Interval flush time, factory setting 5 s
• Detection time, adjustment range 3-15 s
• Detection time, factory setting 7 s
• Flush time, adjustment range 1-15 s
• Flush time, factory setting 7 s
• Download the Installation Instruction and Operating Instruction PDF File from the Additional Info section
• Two years guarantee from Geberit against manufacturing defects
• Application Purposes:
• For automatic flush actuation of urinals
• For Geberit frames for urinal with front actuation
• For installation in installation sets for Geberit urinal flush controls
• Additional Features For Mains Powered:
• Operation: Mains powered
• Power supply via mains connection
• Ready for operation upon connection to mains
• A power supply unit with an LED display
• Power failure control unit
• Valve-closing function when power fails
• Nominal voltage 110-240 V AC
• Mains frequency 50-60 Hz
• Operating voltage 4.5 V DC
• Additional Features For Battery Operated:
• Operation: Battery-operated
• Warning when the Battery is low
• Valve-closing function when Battery is flat
• Battery type Alkaline (1.5 V AA)
• Service life supplied Battery
• Operating voltage 3V DC
• Scope Of Delivery For Mains Powered:
• Cover plate type 30 with IR window
• Solenoid valve
• Power supply unit
• Fastening material
• Scope Of Delivery For Battery Operated:
• Cover plate type 30 with IR window
• Infrared control, pre-mounted on a mounting frame
• Solenoid valve
• Battery box
• 2x alkaline manganese batteries type AA 1.5 V
• Fastening material

Please Note: Can be operated with used water rainwater provided it is passed through a filter system first.