Reina Belva 600mm High Anthracite Single Panel Horizontal Radiator

Reina Belva A-BLV060041SA Details

Make your space snug and cosy in a way that won't detract from your decor when you install the Reina Belva 600mm High Single Panel Aluminium Radiator. The radiator uses a variety of rounded tubes placed vertically upon its frame to heat your space. The unit measures a total of 600 millimetres in height with width options available to you in sizes between 412 millimetres and 1452 millimetres depending on the needs of your space. Suitable for central, electric and dual fuel heating systems, it will spread splendid warmth when needed.

Key Features

✔Brackets for radiator included
✔It comes in a anthracite finish
✔Supplied with Air vent and End plug
✔Manufactured using Aluminium material

Available in different widths: 412mm and 1244mm - [Optional]
Available in different variants: Central heating, Dual Fuel and Electric - [Optional]
Choice of heating element available - [Optional]
Height: 600mm (60cm)
Wall to pipe centres: 34mm (3.4cm)
Distance from wall: 68mm (6.8cm)
Heat output is measured at Delta 70°C
The image shown is for illustration purposes only
Valves, Sleeving kit and chrome pipe kit - [Optional]
For BTU and Watts, Please Refer to the Chart in the Product Variations Info and MFC Code section
For more information on Elements options download the Elements PDF File from the Additional Info Section
Refer to the technical drawing for more details
Five-year guarantee from Reina against manufacturing defects
The valves shown in the image are not included

Please Note: The appropriate wattage of the element (if selected) will be decided by the manufacturer, once the order is placed.

Radiator Calculator

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Range
: Belva
⤷ Colour
: Anthracite
⤷ Country of Origin
: Turkey
⤷ Warranty/Guarantee
: 5 Years
⤷ Material
: Aluminium
⤷ Theme
: Modern
⤷ Installation Type
: Wall Mounted | Floor Mounted
⤷ Width
: 412
⤷ Height
: 600

⤷ Orientation
: Horizontal
⤷ Barcode
: 8800161192475
⤷ BTU Output
: 70°C - 1726
⤷ Watts
: 70°C - 506
⤷ Valves Included
: Sold Separately
⤷ Fuel Type
: Central Heating | Electric | Dual Fuel
⤷ Wall to Centre of Inlet
: 34
⤷ Panel Configuration
: Single

Add-Ons

Optional Accessories

Reina provides optional accessories that you may require for the installation. The manufacturer highly recommends these Accessories. Please Note: The image shown is for illustration purpose only.

No Option Selected
OP-113634 - 200mm Chrome Pipe Kit + £16.40

Reina Belva 600mm High Anthracite Single Panel Horizontal Radiator

£149.02

STOCK AVAILABLITY: 6 Working Days Approx

QS Supplies

Product Variations Info & MFC Code

Width	Pipe Centre	Tube Quantity	BTU	WATTS
412mm	412mm	4	1726	506
1244mm	1244mm	12	5175	1518

4 Features Included In This Product Explained

Optional: Dual Fuel

These radiators or towel warmers can run on a conventional gas-powered central heating system or via your mains electrical supply. You can choose whether or not you want your radiator or towel warmer to come on independently of your central heating system, which is especially useful in summer. These radiators are compatible with heating and hot water, whether the system is open (direct) or closed (indirect).

BTU Output

It is the short form of a British thermal unit (BTU or Btu) and is defined as the amount of heat required to raise the temperature of one pound of water by one degree Fahrenheit. It is a standard unit against which radiator efficiency is measured.
Read more...

Optional: Radiator Valve

Radiator valves help control how much hot water enters and leave it, and the flow of water controls how much heat the radiator generates. These are usually found at the radiator's bottom left, and right corners, where the water pipes enter and exit, or can also be present at the bottom near the centre.
Read more...

Optional Sleeving Kit

A sleeving kit in a radiator heating system are components or materials used to sleeve or insulate the pipes or tubes that circulate hot water or steam from the central heating source to the radiators or heating units. The sleeving kit provides thermal insulation and prevents heat loss, adding to the heating systems efficiency.