Carron Phoenix Aztec Kitchen Sink Mixer Tap

Carron Phoenix Aztec 115.0019.342 Details

The Carron Phoenix Aztec Kitchen Sink Mixer Tap is WRAS approved and operates on gravity fed systems or along with a combi boiler. Offering two-handled functionality for precise control of the temperature and flow, this unit works best when installed in a low pressure system that can maintain a steady water pressure between 0.5 and 1.2 bar at minimum and maximum. Complete with a ceramic disc valve installed with the product itself, this unit will function perfectly in any compatible kitchen area.

Operates on gravity-fed systems or with a combi boiler
Suitable for low water pressure system
Requires a minimum of 0.2 bar to a maximum of 0.5 bar of water pressure
Height: 245mm (24.5cm)
Base width: 45mm (4.5cm)
Base to spout: 210mm (21cm)
Spout reach: 230mm (23cm)
Refer to the technical diagram for complete technical dimensions
Download the Technical Data Sheet, Specification Sheet And Installation Instruction PDF File from the Additional Info section

Info / Size (mm)

Tap
Pipe Centre: 230 mm

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Range
: Aztec
⤷ Water Activation
: By Rotating
⤷ Handle Position
: Left And Right
⤷ Tap Body Shape
: Round
⤷ Colour
: Chrome
⤷ Theme
: Modern
⤷ No. of Holes Required
: 1
⤷ Valve/Cartridge Type
: Ceramic Disc
⤷ Base To Spout
: 210

⤷ Spout Reach
: 230
⤷ Overall Height
: 245
⤷ Minimum Operating Pressure (Bar)
: 0.2
⤷ Handle Style
: Knob
⤷ WRAS Approved
: Yes
⤷ Compliance/Approvals/Standard
: WRAS
⤷ Barcode
: 7612213093569
⤷ Product Type
: Kitchen Mixer Tap

Additional Info & Downloads

Download the Technical Data Sheet Pdf File Download the Technical Specification Sheet Pdf File Download the Installation Instruction Pdf File

Carron Phoenix Aztec Kitchen Sink Mixer Tap - Chrome

£119.99

RRP: ~~£133.32~~

STOCK AVAILABLITY: 6 Working Days Approx

QS Supplies

4 Features Included In This Product Explained

Suitable For Gravity Fed System

Usually found in old properties, Gravity-Fed Systems are known for their low water pressure.

Combi-Boiler System

The showerhead or shower system is suitable for use with a Combi-Boiler System. This system heats cold water on demand, relying solely on mains pressure to move water around your home. These are suitable for mixer showers, as they provide hot water instantaneously and at the highest pressure.

WRAS Approved Product

WRAS Approval means that the particular water fitting or product complies with or meets the requirements specified by the Water Supply (Water Fittings) Regulations or Scottish Byelaws.
Read more...

Low Water Pressure

Water systems operating at a pressure between 0.1 and 0.4 bar are considered low pressure. Products usually come labelled if they are suitable to use under such pressure.
Read more...