Flavel Windsor Traditional Plus Slimline Inset Open Front Gas Fire Brass

The Flavel Windsor Traditional plus Slimline Inset Open Front Gas Fire is a versatile, natural gas-fueled unit that features a full-depth coal fuel effect and a black plan fire back as well. Capable of producing both radiant and convection heats to warm any room its placed in, this product comes in an open-fronted, traditional design and boasts a stunning brass finish on the front of the product as well. Capable of being installed with a brick chimney – class 1, a pre-fabricated flue – class 2, or a pre-cast flue, this unit also includes several safety features such as a flame supervision device and an AirWatch system.

• High-Efficiency Versatile Gas Fire
• The manufacturing code of this product is FSPC11MN
• It comes in a brass finish
• Fireback option: Plain black
• Fuel type: Natural gas
• Useful energy efficiency: 66.8%
• Energy efficiency class: F
• Size [mm]: 475mm x 120mm x 592mm [Width x Depth x Height]
• Size [cm]: 47.5cm x 12cm x 59.2cm [Width x Depth x Height]
• Can use with Brick Chimney - Class 1, Pre-Fabricated flue - Class 2 or Pre-Cast flue
• Download the Installation, Maintenance and User Instructions PDF below
• For complete size details, please refer to the technical drawing
• Seven years guarantee from Flavel
• Builders opening sizes:
• Minimum Height: 550mm (55cm) and Maximum Height: 575mm (57.5cm)
• Minimum width: 330mm (33cm) and Maximum Width: 440mm (44cm)
• Specification of Manual Control:
• A simple and discreet control system is behind the fire's trim or frets on inset fires and the bottom right side on outsets
• Specification of Brick Chimney - Class 1:
• Apart from products designed for “no chimney” applications, all Flavel products will fit brick chimneys. They are easily recognisable by a chimney stack with an accompanying terracotta pot or gas terminal
• Specification of Pre-Fabricated Flue - Class 2:
• Pre-fabricated flues are easily identifiable by a metal flue, terminal on the roof, and a metal flue box behind the fire
• Specification of Pre-Cast flue:
• Pre-cast flues can be identified by a ridge vent or metal flue tube and terminal on the roof. Constructed from concrete or clay blocks, they form a rectangular section flue. All Flavel fires featuring this icon are only suitable for Pre-Cast flues conforming to BS EN 1858