Hudson Reed Revolution Industrial Triple Shower Valve

Hudson Reed Revolution SIWTR02 Details

Hudson Reed Revolution Industrial Triple Shower Valve comes with or without diverter in a stunning format. It has a Width of 100mm, Depth of 145mm and Height 280mm. Suitable for low-pressure water systems, it works with a minimum of 0.1 bar of water pressure. Designed for industrial purpose, the high quality internal brassware assures unhindered service. The valve finds applications in gravity fed pumped unvented high pressure or fully modulated combi-boilers.

Key Features

✔Choice of different finish: Chrome, Matt Black and Brushed Brass [Optional]
✔Quarter turn valve operated
✔High-quality internal brassware
✔Twenty years guarantee from Hudson Reed against manufacturing defects

Available in different variants: Without Diverter Or With Diverter [Optional]
Size [mm]: 80mm x 145mm x 280mm [Width x Depth x Height]
Size [cm]: 8cm x 14.5cm x 28cm [Width x Depth x Height]
Compatible to use for industrial purposes
Accurate flow control
Excellent flow rates
Suitable for use with all systems: gravity-fed pumped unvented high pressure or fully modulated combi-boilers
For complete size details, please refer to technical drawing
During installation, extra care must be taken to avoid damaging the fittings
Details For Without Diverter:
Mount Type: Wall, Recessed
Pipe size: 15mm (1.5cm) and 22mm (2.2cm)
No. of Outlets: 2
Approval: WRAS, TMV2 and TMV3
Suitable for low-pressure water system
Requires a minimum of 0.1 bar or above water pressure to operate smoothly
Details For With Diverter:
Mount Type: Wall, Recessed
Pipe size: 22mm (2.2cm) (3/4inch Bsp)
Pipe centre: 125mm (12.5cm)
No. of Outlets: 3
Suitable for medium-pressure water system
Requires a minimum of 0.5 bar or above water pressure to operate smoothly
Download Customer DataSheet PDF from the Additional Info Section

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Colour
: Chrome
⤷ Warranty/Guarantee
: 20 Year
⤷ Theme
: Modern
⤷ Installation Type
: Wall Mounted
⤷ Inlet Connections
: G.1/2
⤷ Minimum Operating Pressure (Bar)
: 0.1
⤷ Handle Style
: Knob
⤷ WRAS Approved
: Yes
⤷ Backplate Width
: 100

⤷ Backplate Height
: 280
⤷ TMV2 Approved
: Yes
⤷ TMV3 Approved
: Yes
⤷ Number of Handles
: 3
⤷ Plumbing System Compatibility
: Suitable for use with all systems
⤷ Plumbing Option
: Concealed
⤷ Cartridge Included
: Yes
⤷ Cartridge Type
: Quarter Turn

Additional Info & Downloads

Download the Customer Data Sheet For With Or Without Diverter Pdf File

Technical Images

Hudson Reed Revolution Industrial Triple Shower Valve

£197.72

RRP: ~~£604.00~~

IN-STOCK

Delivery in 4 Working Days Approx.

QS Supplies

7 Features Included In This Product Explained

Combi-Boiler System

The showerhead or shower system is suitable for use with a Combi-Boiler System. This system heats cold water on demand, relying solely on mains pressure to move water around your home. These are suitable for mixer showers, as they provide hot water instantaneously and at the highest pressure.

Unvented System

The unvented water systems usually have a separate hot water cylinder, which is pre-heated via a combi boiler or other heating sources to store a quantity of hot water at mains pressure.

Optional: Diverter In Showers

A diverter, specifically in bath-shower combos, redirects the water flow from the bathtub spout to the showerhead. You can activate it using the nozzle in the bath shower mixer tap.
Read more...

TMV2 Approved Product

TMV2 is an independent certification for thermostatic mixers, including shower valves, run by BuildCert that ensures national and international standards as specified under (BS EN 1111 and 1287) are met. These standards detail the exacting requirements that a thermostatic valve or product must comply with to guarantee a high thermostatic protection and safety standard. Products meeting this requirement carries the logo and protect against any scalding accidents.

TMV3 Approved Product

TMV3 approval means a thermostatic valve is certified and approved for use in healthcare and commercial situations.

WRAS Approved Product

WRAS Approval means that the particular water fitting or product complies with or meets the requirements specified by the Water Supply (Water Fittings) Regulations or Scottish Byelaws.
Read more...

Low Water Pressure

Water systems operating at a pressure between 0.1 and 0.4 bar are considered low pressure. Products usually come labelled if they are suitable to use under such pressure.
Read more...

Questions & Answers

Submit Your Questions 2 Questions Answered

Have a question about this item? Ask our technical team. We aim to reply within 72 hours.

Joe Asked :
I can't figure out whether I need a diverter for my shower setup. I will have a shower with a fixed head and a flexible head, which will used in a shower bath. Will I need a diverter to use the bath taps?

Answered By QS Team

The SIWTR03 includes a diverter, which controls three products; the SIWTR02 doesn't and only controls two products. If you want to control a bath filler or spout with the shower valve, the one with the diverter would be recommended. If you want to control just the overhead shower and the handheld, the one without would be recommended.