Flavel Kenilworth Plus High Efficiency Gas Fire

The Flavel Kenilworth Plus High-Efficiency Gas Fire is available for purchase in several finish options as well as the users choice of the manual, slide or remote-control operation. Offering a realistic coal-fuel effect and fueled via natural gas, this product can be used with a class 1 brick chimney, a class 2 prefabricated flue or a pre-cast flue if preferred. Boasting both radiant and convective heat, this unit makes the perfect addition to any modern or traditional room layout, anywhere. Providing 4.2kW of direct heat output to enjoy, this model also includes several safety features, including a supervision device and an AirWatch system.

• Choice of Manual, Slide or Remote Controls [Optional]
• Conventional flue - Open fronted
• Fuel type: Natural gas
• Useful energy efficiency: 68.3%
• Energy efficiency class: F
• 4.2kW Direct heat output
• Fireback option: Plain Black
• Type of heat: Radiant and convected
• It can be used with Brick Chimney - Class 1, Pre-Fabricated flue - Class 2 or Pre-Cast flue
• Size [mm]: 500mm x 170mm x 595mm [Width x Depth x Height]
• Size [cm]: 50cm x 17cm x 59.5cm [Width x Depth x Height]
• Download the Installation, Maintenance Instructions, Energy Label PDF File from the Additional Info Section
• For complete size details, please refer to the technical drawing
• Builders opening sizes:
• Minimum height: 550mm (55cm) and Maximum height: 570mm (57cm)
• Minimum width: 370mm (37cm) and Maximum width: 440mm (44cm)
• Specification of Manual Control:
• A simple and discreet control system located behind the fire's trim or fret on inset fires and the bottom right side on outsets
• Specification of Slide Control:
• Convenient control that eliminates the necessity of bending down
• Specification of remote control:
• The remote control handset can be used to light the fire as well as to adjust the flame height and heat output
• Specification of Brick Chimney - Class 1:
• Apart from products designed for “no chimney” applications, all Flavel products will fit brick chimneys. They are easily recognisable by a chimney stack with an accompanying terracotta pot or gas terminal
• Specification of Pre-Fabricated Flue - Class 2:
• Pre-fabricated flues are easily identifiable by a metal flue and terminal on the roof and a metal flue box behind the fire
• Specification of Pre-Cast flue:
• Pre-cast flues can be identified by a ridge vent or metal flue tube and terminal on the roof. Constructed from concrete or clay blocks, they form a rectangular section flue. Conforming to BS EN 1858