Flavel Regent Electronic Side Control Full Depth Outset Gas Fire

Flavel Regent FRGCP0EN Details

The Flavel Regent Electronic Side Control Full Depth Outset Gas Fire is available for purchase in 2 stunning finish options to choose from; bronze or black. Fueled via natural gas and providing an impressive 4.5kW of direct heat output, this product is energy efficiency class E rated and also offered radiant and convective heating. Designed for use with a class 1 brick chimney, a class 2 prefabricated flue or a pre-cast flue, this model makes a stylish addition to any modern or contemporary room layout, anywhere. A full-depth, electronically controlled unit any user will truly appreciate.

Traditional hearth-mounted open-fronted gas fire
Full-depth outset gas fire
Control type: Electronic side
Fuel type: Natural gas
Energy efficiency class: E
Type of Heat: Radiant and convected
It can be used with Brick Chimney - Class 1, Pre-Fabricated flue - Class 2 or Pre-Cast flue
Size [mm]: 710mm x 255mm x 680mm [Width x Depth x Height]
Size [cm]: 71cm x 25.5cm x 68cm [Width x Depth x Height]
Download the Installation, Maintenance and User instructions PDF from below
For complete size details, please refer to the technical drawing
Builders opening sizes:
Minimum Height: 470mm (47cm) and Maximum Height: 650mm (65cm)
Minimum width: 305mm (30.5cm) and Maximum Width: 440mm (44cm)
Specification of Electronic Side Control:
Both ignition and heat are controlled by a single rotary motion to light the fire. This is easy to use control. Requires an AA battery
Specification of Brick Chimney - Class 1:
Apart from products designed for “no chimney” applications, all Flavel products will fit brick chimneys. They are easily recognisable by a chimney stack with an accompanying terracotta pot or gas terminal
Specification of Pre-Fabricated Flue - Class 2:
Pre-fabricated flues are easily identifiable by a metal flue and terminal on the roof and a metal flue box behind the fire
Specification of Pre-Cast flue:
Pre-cast flues can be identified by a ridge vent or metal flue tube and terminal on the roof. Constructed from concrete or clay blocks, they form a rectangular section flue. All Flavel fires featuring this icon are only suitable for Pre-Cast flues conforming to BS EN 1858