Flavel Regent LFE Traditional Outset Gas Fire

The Flavel Regent LFE Traditional Outset Gas Fire is a full depth outset-style unit that includes a realistic coal fuel effect and a black plan fire back as well. Available in either a bold bronze or classic black finishes to choose from, this product also offers your choice of an electronic side or fully remote-controlled unit depending on the preferences of the user. Capable of producing 3.3kW of direct heat output and warming the room via radiant heat, this product can be installed with a brick chimney – class 1, a pre-fabricated flue – class 2, or a pre-cast flue if desired.

• Traditional hearth-mounted open-fronted gas fire
• Choice of Electronic side or full Remote control [Optional]
• Full-depth outset gas fire
• Fuel type: Natural gas
• Fireback option: Plain black
• 3.3kW Direct heat output
• Energy efficiency class: F
• Type of Heat: Radiant
• It can be used with Brick Chimney - Class 1, Pre-Fabricated flue - Class 2 or Pre-Cast flue
• Size [mm]: 710mm x 255 x 680mm [Width x Depth x Height]
• Size [cm]: 71cm x 25.5cm x 68cm [Width x Depth x Height]
• Download the Installation, Maintenance and User Instructions PDF below
• For complete size details, please refer to the technical drawing
• Builders opening sizes:
• Minimum Height: 525mm (52.5cm) and Maximum Height: 650mm (65cm)
• Minimum width: 305mm (30.5cm) and Maximum Width: 440mm (44cm)
• Specification of Electronic Side Control:
• Both ignition and heat are controlled by a single rotary motion to light the fire. These are easy-to-use control. Requires an AA battery
• Specification of Remote Control:
• The remote control handset is used to light the fire and adjust the flame height and heat output
• Specification of Brick Chimney - Class 1:
• Apart from products designed for “no chimney” applications, all Flavel products will fit brick chimneys. They are easily recognisable by a chimney stack with an accompanying terracotta pot or gas terminal
• Specification of Pre-Fabricated Flue - Class 2:
• Pre-fabricated flues are easily identifiable by a metal flue and terminal on the roof and a metal flue box behind the fire
• Specification of Pre-Cast flue:
• Pre-cast flues can be identified by a ridge vent or metal flue tube and terminal on the roof. Constructed from concrete or clay blocks, they form a rectangular section flue. All Flavel fires featuring this icon are only suitable for Pre-Cast flues conforming to BS EN 1858