Flavel Welcome Side Control Traditional Hearth Mounted Outset Gas Fire

Flavel Welcome Side Control Traditional Hearth Mounted Outset Gas Fire can be purchased in Black or Bronze finish. There cannot be a better shield from cold when the temperature dips, as this masterpiece are designed to spread cheer and warmth in the months that lie ahead. The Hearth Mounted Outset Gas Fire, promises a lot of visual appeal. It offers Flame Supervision Device and Airwatch System for safe use and gives off a realistic coal fuel effect. Offering Radiant and Convected heat, the gas fire comes with 7 years guarantee from the manufacturer.

• Traditional hearth-mounted outset gas fire
• Control type: Electronic Side
• Fuel type: Natural gas
• Conventional flue - Open fronted
• Energy efficiency class: E
• Type of Heat: Radiant and Convected
• Safety: Flame Supervision Device and Airwatch System
• It can be used with Brick Chimney - Class 1, Pre-Fabricated flue - Class 2 or Pre-Cast flue
• Size [mm]: 718mm x 310mm x 680mm [Width x Depth x Height]
• Size [cm]: 71.8cm x 31cm x 68cm [Width x Depth x Height]
• Download the Installation, Maintenance and User instructions PDF from below
• For complete size details, please refer to the technical drawing
• Builders opening sizes:
• Minimum Height: 470mm (47cm) and Maximum Height: 650mm (65cm)
• Minimum width: 305mm (30.5cm) and Maximum Width: 440mm (44cm)
• Specification of Electronic Side Control:
• Both ignition and heat are controlled by a single rotary motion to light the fire. This is easy to use control. Requires an AA battery
• Specification of Brick Chimney - Class 1:
• Apart from products designed for “no chimney” applications, all Flavel products will fit brick chimneys. They are easily recognisable by a chimney stack with an accompanying terracotta pot or gas terminal
• Specification of Pre-Fabricated Flue - Class 2:
• Pre-fabricated flues are easily identifiable by a metal flue and terminal on the roof and a metal flue box behind the fire
• Specification of Pre-Cast flue:
• Pre-cast flues can be identified by a ridge vent or metal flue tube and terminal on the roof. Constructed from concrete or clay blocks, they form a rectangular section flue. All Flavel fires featuring this icon are only suitable for Pre-Cast flues conforming to BS EN 1858