Menu
Rate this Item.:
I love the low profile, but this does come at a cost. Six weeks after installation, the water started to back up, and there was an unpleasant smell from the waste. It turned out that the waste filter had clogged up, and due to the low profile, there was stagnant water that had algae and smelled. No instructions from RAK on how to remove the filter and clean it (which is a real pain), and it needed bleach to get rid of the smell - this needs doing every four weeks or so, from my experience. Also, unless you wipe dry the tray after every use, pink algae soon form on the tray due to the non-slip surface
Submit Your Questions 6 Questions Answered
Have a question about this item? Ask our technical team. We aim to reply within 72 hours.
Nicola Asked :Is there a frame or legs that are available to raise the tray above floor level?
The RAK Feeling Rectangular Shower Tray is to be installed flush to floor, semi-recessed or directly onto the floor.
Jason Asked :Can I fit a standard 90mm waste, or do I need the specific RAk one?
The RAK Feeling Rectangular Shower Tray is supposed to be used with RAK waste.
Keith Asked :What sub-base is required for this tray? I am laying on timber floor joists.
RAK trays must be laid onto Marine ply and bedded with silicon or tile adhesive.
Claude Asked :I really want the waste to be either black or brushed brass. Is there a way to do this?
Unfortunately, the waste for the RAK Feeling Shower Tray is only available in a brushed chrome finish.
Svetlana Asked :Does it come with a drain cover?
Yes, it comes with a square grid.
Martin Asked :Please can you send me a picture of this drain waste so I can check if it is the correct one required before purchasing: - OP-186828 Drain Membrane Waste.
Please refer to the attached PDF file for the datasheet of Drain Membrane Waste.
We will soon verify the details and add your rating appropriately.