Flavel Finesse Versatile Hole-In-The-Wall Inset Gas Fire

Flavel Finesse Versatile Hole-In-The-Wall Inset Gas Fire has a contemporary Hang-on-the-Wall design. It comes in a choice of coal or pebble fuel effect [Optional]. Available in Chrome or Brass finishes with a slimline inset profile. It works using conventional flue - Open with Natural gas-producing 2.7kW Direct Radiant heat output. It also comes with a flame Supervision device and Airwatch System for safety. It comes with a complete 7 years guarantee from Flavel.

• Contemporary Hang-on-the-Wall design
• Choice of coal or pebble fuel effect - [Optional]
• 2.7kW Direct heat output
• Fireback option: Plain Black
• Type of heat: Radiant
• Safety: Flame Supervision Device and Airwatch System
• It can be used with Brick Chimney - Class 1, Pre-Fabricated flue - Class 2 or Pre-Cast flue
• Size [mm]: 558mm x 50mm x 690mm [Width x Depth x Height]
• Size [cm]: 55.8cm x 5cm x 69cm [Width x Depth x Height]
• Download the Installation, Maintenance and User Instructions PDF below
• For complete size details, please refer to the technical drawing
• Builders opening sizes:
• Minimum height: 550mm (55cm) and Maximum height: 575mm (57.5cm)
• Minimum width: 330mm (33cm) and Maximum width: 430mm (43cm)
• Specification of Manual Control:
• A simple and discreet control system is located behind the fire's trim or frets on inset fires and the bottom right side on outsets
• Specification of Brick Chimney - Class 1:
• Apart from products designed for "no chimney" applications, all Flavel products will fit brick chimneys. They are easily recognisable by a chimney stack with an accompanying terracotta pot or gas terminal
• Specification of Pre-Fabricated Flue - Class 2:
• Pre-fabricated flues are easily identifiable by a metal flue and terminal on the roof and a metal flue box behind the fire
• Specification of Pre-Cast flue:
• Pre-cast flues can be identified by a ridge vent or metal flue tube and terminal on the roof. Constructed from concrete or clay blocks, they form a rectangular section flue. Conforming to BS EN 1858

Note: This product is not suitable for primary heating purposes