Nuie Windon 80 x 216mm Twin Thermostatic Shower Valve

Nuie Windon WINTW01 Details

Nuie Windon 80 x 216mm Twin Thermostatic Shower Valve comes with a square shape and lever handle. It can be purchased with or without Diverter and is supplied with a valve and cartridge. The product can be installed Recessed or on the surface of the wall and comes with a rectangular shape backplate. It comes included with 1 Square handle and 1 Lever handle and has a minimalist sleek design in chrome finish. It can be fitted vertically or horizontally and can be used with a concealed shower, available separately.

Key Features

✔Features stain rust resistant
✔Five-year guarantee on Chrome finish and three-year on other finishes
✔Even in hard water areas, the patented cartridge is highly resistant to calcium build-up
✔Complete thermal protection to prevent scalding (Valve gets shut down) in the event of hot or cold water shut off

Choice of different finishes: Chrome, Matt Black, Brushed Brass, Brushed Pewter and Brushed Bronze - [Optional]
Valve available Without Diverter or With Diverter - [Optional]
Size [mm]: 80mm x 135mm x 216.5mm [Width x Depth x Height]
Size [cm]: 8cm x 13.5cm x 21.65cm [Width x Depth x Height]
Supplied with valve and cartridge
Valve handle type: square and lever
1/4 turn ceramic disc cartridge
Installation type: Recessed / Wall
Rectangular shape back plate
1 Square handle and 1 Lever handle included
Minimalist sleek design in chrome finish
Can be fitted vertically or horizontally
Suitable to use in combination with concealed shower
Thermostatic control to +/- 2° only when the water pressure fluctuates
Suitable for use with all systems like gravity-fed pumped unvented high-pressure or fully modulated combi-boilers
The cartridge is fully reversible - it doesn't need re-plumbing when hot and cold are in the wrong way round
Easily remove the cartridge, turn 180°, and replace
Download the Customer Data Sheet and Installation Instruction PDF file from the Additional Info Section
Refer to the technical drawing for more details
Valve Without Diverter:
Inlet and Outlet connection: G1/2 inch
Number of outlets: 1
Pipe Size: 15mm (1.5cm) (1/2 inch BSP)
Accurate flow rate
Suitable for low-pressure water system
Requires 0.1 bar operating water pressure
WRAS Approved
Valve With Diverter:
Number of outlets: 2
Inlet and Outlet connection: G3/4 inch
Pipe size: 22mm (2.2cm) (3/4 inch BSP)
Suitable for medium-pressure water system
Requires 0.5 bar operating water pressure

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Colour
: Chrome
⤷ Shape
: Square
⤷ Warranty/Guarantee
: 5 Years On Chrome | 3 Years On Other Finishes
⤷ Material
: Brass | ABS
⤷ Theme
: Modern
⤷ Installation Type
: Recessed | Wall
⤷ Overall Height
: 216.5
⤷ Min-Max Wall Mount
: 72-85
⤷ Minimum Operating Pressure (Bar)
: 0.1 bar
⤷ Flow Rates (l/min)
: 0.1 bar-5.5 | 0.2 bar-7.1 | 0.5 bar-14 | 1 bar-20 | 2 bar-29 | 3 bar-44
⤷ Handle Style
: Lever | Square
⤷ WRAS Approved
: Yes
⤷ Depth
: 135
⤷ Temperature Control
: Thermostatic

⤷ Backplate Width
: 80
⤷ Backplate Height
: 215
⤷ Anti-Scald
: Yes
⤷ TMV2 Approved
: Yes
⤷ TMV3 Approved
: Yes
⤷ Number of Handles
: 2
⤷ Number of Outlet
: 1
⤷ Outlet Connection
: G1/2 inch
⤷ Orientation
: Landscape | Portrait
⤷ Plumbing System Compatibility
: Gravity Fed Pumped | Combi Boilers
⤷ Plumbing Option
: Concealed
⤷ Overall Width
: 80
⤷ Cartridge Included
: Yes
⤷ Cartridge Type
: 1/4 Turn Ceramic Disc

Additional Info & Downloads

Download the Customer Data Sheet Pdf File Download the Installation Instructions Pdf File

Technical Images

Nuie Windon 80 x 216mm Twin Thermostatic Shower Valve

£150.90

RRP: ~~£454.00~~

STOCK AVAILABLITY: 3 Working Days Approx

QS Supplies

9 Features Included In This Product Explained

Thermostatic Control

Thermostatic shower control works behind the scenes to achieve or maintain water temperature output from a showerhead. With the built-in safety feature, the shower provides a consistent water temperature.
Read more...

Combi-Boiler System

The showerhead or shower system is suitable for use with a Combi-Boiler System. This system heats cold water on demand, relying solely on mains pressure to move water around your home. These are suitable for mixer showers, as they provide hot water instantaneously and at the highest pressure.

Unvented System

The unvented water systems usually have a separate hot water cylinder, which is pre-heated via a combi boiler or other heating sources to store a quantity of hot water at mains pressure.

Optional: Diverter In Showers

A diverter, specifically in bath-shower combos, redirects the water flow from the bathtub spout to the showerhead. You can activate it using the nozzle in the bath shower mixer tap.
Read more...

TMV2 Approved Product

TMV2 is an independent certification for thermostatic mixers, including shower valves, run by BuildCert that ensures national and international standards as specified under (BS EN 1111 and 1287) are met. These standards detail the exacting requirements that a thermostatic valve or product must comply with to guarantee a high thermostatic protection and safety standard. Products meeting this requirement carries the logo and protect against any scalding accidents.

TMV3 Approved Product

TMV3 approval means a thermostatic valve is certified and approved for use in healthcare and commercial situations.

WRAS Approved Product

WRAS Approval means that the particular water fitting or product complies with or meets the requirements specified by the Water Supply (Water Fittings) Regulations or Scottish Byelaws.
Read more...

Ceramic Disc Cartridge

It has two ceramic discs, one fixed in place and the other moveable with the tap or valve handle. It is the most common technology used in modern tapware as it offers unmatched advantages such as no leaks and drips and saves on water and money.
Read more...

Low Water Pressure

Water systems operating at a pressure between 0.1 and 0.4 bar are considered low pressure. Products usually come labelled if they are suitable to use under such pressure.
Read more...