Roper Rhodes Craft Deck Mounted Bath Filler Tap Chrome

As you die in the bath, content to let your aching muscles relax, you pay little heed to the implement responsible for letting you soothe your knotted muscles. The element that allows you to enjoy these moments of relaxation is the water spout. And if you are looking for a tap that is not only highly functional but also an eye-catching creation that will enhance the beauty of the bath as well as the entire washroom, then there is only one choice for you: Roper Rhodes Craft Deck Mounted Bath Mixer Tap. This marvel finished in chrome for a sleek and gleaming appearance, is suitable for deck mounted installation and has a Width of 232mm and a height of 139mm.

• Available in different variants - Without Shower Kit or With Shower Kit [Optional]
• It comes in a chrome finish
• Suitable for deck-mounted installation
• Size: Width 232mm (23.2cm) x Height 139mm (13.9cm)
• Centre of the inlet to the outlet: 107mm (10.7cm)
• Base to spout: 53mm (5.3cm)
• Inlet centre: 180mm (18cm)
• Dual-lever operation feature
• Aerator comes pre-installed but can be replaced
• Connectors threaded have a standard 3/4 inch BSP fixing
• Suitable for all plumbing systems, including conventional gravity fed
• Suitable for low-pressure water system
• Requires 0.2 bar operating water pressure
• The technical drawing is available for more technical details
• Download the Customer Data Sheet PDF File from the Additional Info Section
• Specification For With Shower Kit:
• Supplied with handset and hose
• Under Spout Diverter: located underneath the spout, turn to divert the water flow to use the shower or fill the bath and easier to clean
• Without Kit:
• Flow Rate (litres/min) : 0.2bar - 7.6, 0.3bar - 9.6, 0.4bar - 11.5, 0.5bar - 13, 1bar - 18, 2bar - 26
• With Kit:
• Flow Rate (litres/min) : 0.2bar - 7, 0.3bar - 8.6, 0.4bar - 10, 0.5bar - 11.5, 1bar - 16.5, 2bar - 23.5