Duravit No.1 1700 x 1000mm Trapezoidal Corner Bath With Backrest Slope

Duravit No.1 700508000000000 Details

Once you set your eyes on this stylish Duravit No.1 Trapezoidal Acrylic Bath you will not be able to stop yourself from bringing it home. This sensational built-in Bath comes included with a single backrest slope and comes with or without support feet. The elegant trapezoid shape of this Bath certainly gives it a character that is individualistic, just like you. The white finish of this Bath can blend with any bathroom interior. Suitable for left or right-hand installation, it comes with an overflow and measures a length of 1700mm, Width of 1000mm and depth of 480mm. The CE Certified product has a water capacity of 210 litres and can be used with optional Waste and Overflow.

Available in backrest slope: Left or Right-Hand Installation - [Optional]
It comes in a white Alpin finish
Size [mm]: 1700mm x 1000mm x 480mm [Length x Width x Depth]
Size [cm]: 170cm x 100cm x 48cm [Length x Width x Depth]
Weight: 26.5kg
Water capacity: 210 litres
Suitable for built-in installation
Made using shock and impact-resistant plastic with a pleasantly warm
Smooth and pore-free surface
Support frame or styrene support box - [Optional]
Rubber profile - [Optional]
Waste and Overflow - [Optional]
Bathtub anchor - [Optional]
Noise reduction gasket - [Optional]
Download the Mounting Instruction PDF File from the Additional Info Section
Refer to the technical drawing for more technical specifications
Five-year warranty from Duravit against manufacturing defects
Waste and Overflow shown in the image are not included

Info / Size (mm)

Bath
Length: 1700 mm
Width: 1000 mm

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Range
: No.1
⤷ Interior Shape
: Trapezoidal
⤷ External Length
: 1700
⤷ External Width
: 1000
⤷ Tub Depth
: Internal - 460, External - 480
⤷ Colour
: White Alpin
⤷ Internal Bottom Length
: 1140
⤷ Internal Bottom Width
: 570
⤷ Internal Top Length
: 1570
⤷ Internal Top Width
: 870
⤷ Height of Rim
: 35
⤷ Distance Tub edge to centre of drain hole
: 735

⤷ Diameter of Drain hole
: 52
⤷ Weight in kg
: 26.5
⤷ Capacity in litres
: 140
⤷ Handed Type
: Left | Right
⤷ Country of Origin
: Germany
⤷ Warranty/Guarantee
: 5 Years
⤷ Material
: Acrylic
⤷ No. of Bathers
: 2
⤷ Theme
: Modern
⤷ Waste Included
: Sold Separately
⤷ Barcode
: 4063382185525

Additional Info & Downloads

Download the Mounting Instruction Pdf File

Duravit No.1 1700 x 1000mm Trapezoidal Corner Bath With Backrest Slope

£436.80

RRP: ~~£624.00~~

STOCK AVAILABLITY: 6 Working Days Approx

QS Supplies

1 Features Included In This Product Explained

CE Certified Product

CE mark meets the prescribed safety, health and environmental protection requirements and all appropriate EU requirements. This mark is mandatory for products designed, made and sold in the European Economic Area.

Questions & Answers

Submit Your Questions 2 Questions Answered

Have a question about this item? Ask our technical team. We aim to reply within 72 hours.

Usman Asked :
The support box, what does this look like? Is it like the picture?

Answered By QS Team

Please refer to the attached PDF for the information required.

Was this answer helpful?

Tanya Asked :
Is the side of the bath wide enough to have the taps on it, or will they just be in the wall?

Answered By QS Team

It is not recommended to drill any of our baths as this is not covered under the warranty. However, if you are going to do it, the edge thickness should be at least 100mm, and since this one is only 65mm, it is better for the taps to be wall-mounted.

Was this answer helpful?