Armitage Shanks Sandringham 21 Single Ended 1600 x 700mm Bath White

Armitage Shanks Sandringham 21 E027601 Details

The Idealform 2 Tap Hole Bath with Tread from Armitage Shanks is moulded from a high-quality reinforced cell cast acrylic sheet that is warm to the touch and provides exceptional insulation. It is widely used in hotels across the UK, is equally suitable for domestic use, is easy to maintain, and comes with a contemporary space-saving design that uses water economically. Also available are Grips and tread that aid in easy entry and exit and resist any slips.

It is carefully designed to allow you to enjoy your bathroom experience. Extremely safe, it features optional chrome finish hand grips and a tread pattern and is guaranteed for 25 years. The bath mixer tap shown in the images is not included and can be purchased separately if required.

Available in different variants [Optional]
Size [mm]: 1595mm x 695mm x 370mm [Length x Width x Height]
Size [cm]: 159.5cm x 69.5cm x 37cm [Length x Width x Height]
Suitable for both domestic and hotel use
Weight: 19Kg
Refer to the technical drawing for more details
Optional Products
1700mm Front panel
700mm End panel
Plastic P trap with 75mm seal, multi-purpose outlet suitable for plastic and BS copper pipe
Waste 1½ inch combined bath chain and overflow
Idealform - [See Features Explained Section]
Tap and waste shown in the image are not included

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Position of Drain
: Foot-end
⤷ Range
: Sandringham 21
⤷ Bath Type
: Standard
⤷ External Length
: 1595
⤷ External Width
: 695
⤷ Tub Depth
: 370
⤷ Front Panel Included
: Sold Separately
⤷ End Panel Included
: Sold Separately
⤷ Colour
: White
⤷ Grips Included
: Sold Separately
⤷ Internal Bottom Length
: 980
⤷ Internal Bottom Width
: 277-276
⤷ Internal Top Length
: 1234
⤷ Internal Top Width
: 498-506
⤷ Height of Rim
: 30
⤷ Distance Tub edge to centre of drain hole
: 270
⤷ Distance Top edge to centre of overflow hole
: 75

⤷ Diameter of overflow hole
: 44
⤷ Diameter of Drain hole
: 53
⤷ Distance tub edge (foot end) to where handle start
: 780
⤷ Distance tub edge (Foot end) to where handle end
: 986
⤷ Rim Width
: 70,83,100
⤷ Distance Between Centre Holes
: 180
⤷ Weight in kg
: 19
⤷ Shape
: Rectangular
⤷ Capacity in litres
: 160
⤷ Country of Origin
: EU
⤷ Material
: Idealform Acrylic
⤷ No. of Bathers
: 1
⤷ Theme
: Modern
⤷ Waste Included
: Sold Separately
⤷ Tap Holes
: 2
⤷ Barcode
: 5.01783E+12

Add-Ons

Front Panel

A suitable front panel to personalise your bath also available as an option below. Please select as per your choice from the option given below

No Option Selected
OP-43076 - Front Panel 1600mm White - S101801 + £37.40

End Panel

Strong and Durable End Panel for Bath. The image shown is for illustration purposes only

No Option Selected
OP-43077 - 700mm End Panel White - S102001 + £22.39

'P' Trap

1.5-inch plastic P trap with 75mm seal - multi-purposes outlet suitable for plastic and BS copper pipe. Ideal for domestic and hotel use.

No Option Selected
OP-43041 - 1.5 Inch Plastic P Trap With 75mm Seal - MP Outlet For Plastic And BS Copper Pipe - S897067 + £32.08

Waste

Bath waste comes in chrome finished. The image is for illustration purposes only.

No Option Selected
OP-43035 - 1.5 Inch Combined Chain Waste And Overflow - S8830AA + £26.12

Armitage Shanks Sandringham 21 Single Ended 1600 x 700mm Bath White

£153.12

RRP: ~~£264.34~~

STOCK AVAILABLITY: 6 Working Days Approx

QS Supplies

3 Features Included In This Product Explained

With / Without Overflow

An overflow is a small hole or opening at the upper part of a sink, basin, bidet or tub that drains away water upon reaching its level so that no water is spilt. When a basin or bath does not come with this design feature, it is called 'without-overflow' and will need a compatible drain.

Idealform

All Idealform baths are moulded from a high-quality reinforced cell-cast acrylic sheet that is warm to the touch and provides exceptional insulation. The sheet is heated and then vacuum formed into the desired bath shape. It is then fully reinforced with Glass Reinforced Polymer (GRP). A medium-density 15mm base board is positioned and encapsulated with extra Glass Reinforced Polymer (GRP). The bath is then cured, trimmed and drilled for tapholes or bath grips if required.

Optional: Front Panel

A front bath panel is a decorative accessory that is used to cover the front-facing side of a bathtub for a neat and polished look. It also conceals plumbing and framework and comes in different sizes, textures and materials.

Questions & Answers