Triton Instaflow Stored Water Heater

Triton Instaflow SPINSF500S Details

It wont be an exaggeration to say that this shower will leave you flat with its design and functionality. Yes, Triton Instaflow Stored Water Heater is synonymous with beauty and quality. The wall-mounted unit in white and satin finish offers you the convenience of hot water when needed. You can take its durability for granted, as the heater is made to last years of use. Wall hung brackets, Dielectric connector and Pressure relief device. It uses the cold mains water supply to give you hot water with under-sink installation and top connectors. It comes with an enamel-coated heater tank with magnesium anode protection and an Efficient B energy rating.

Key Features

✔Quick heat-up times and variable temperature settings (with a maximum temperature of 75° C)
✔Corrosion-resistant, enamel-coated heater tank with magnesium anode protection
✔Approval: BEAB, CE
✔Guarantee: Two-year parts and labour from the manufacturer

Available in 2 kW - 1.5kW and 2.0 KW [Optional]
Available as 5l, 10l or 15l capacity [Optional]
Size: Width 290 x Depth 269.7 x Height 311mm (+/- 5mm)
It comes in a White and stained finish
Includes: Wall hung brackets, Dielectric connector and Pressure relief device
Stored water heater fed by the cold mains water supply
Under-sink installation with top connectors
Efficient B energy rating
Provides a high flow rate
Temperature control: Thermostatic
Splashproof rating: IPX4
Plumbing system: Cold only
Water connection: 1/2" BSP
The pressure required: Min 0.5 bar Max 6.0 Bar
Electric connection: 10 Plug socket
Heat-up time: 5 L - 15 min, 10L - 23 min and 15L - 35 min
Water Entry Point (inlet and outlet): Rear
Energy Rating 3
The expansion vessel and Non-Return Valve [Optional]
Discharge tundish [Optional]
Pressure-reducing valve [Optional]
Download the Installation And User Guide And Energy Label PDF File from the Additional Info Section

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Colour
: White and Satin
⤷ Shape
: Rectangular
⤷ Country of Origin
: UK
⤷ Warranty/Guarantee
: 2 Years
⤷ Inlet Connections
: 1/2" BSP
⤷ Configuration
: Water Heater Only
⤷ Compliance/Approvals/Standard
: BEAB, CE
⤷ Product Type
: Water Heater

⤷ Temperature Control
: Yes
⤷ Plumbing System Compatibility
: Cold Only
⤷ KW Rating
: 1.5
⤷ Low pressure indicator
: No
⤷ Water Entry Points
: Rear
⤷ Unit Width
: 290
⤷ Unit Height
: 311
⤷ Unit Depth
: 269.7

Additional Info & Downloads

Download the Installation and User Guide Pdf File Download the Energy Label Pdf File

Technical Images

Add-Ons

Expansion Vessel

Perfect for when water expansion cannot be accommodated within the pipework. It has Bottom outlet connections and comes with Fixing wall bracket. Please Note: Image shown is for illustration purpose only.

No Option Selected
OP-217504 - 2L Expansion Vessel And Non-Return Valve + £69.31

Discharge Tundish

Triton Instaflow Stored Water Heaters allows you to see if water is being discharged from the unit and PRV and therefore pressure build up. Please Note: Image shown is for illustration purpose only.

No Option Selected
OP-217505 - Discharge Tundish + £26.83

Pressure Reducing Valve

Pressure Reducing Valve for use with unvented systems to control the incoming water supply to a hot water unit. This valve features Integral strainer to filter any debris within the system. Note: Image shown is for illustration purpose only.

No Option Selected
OP-217508 - Pressure Reducing Valve + £63.96

£110.23

RRP: ~~£134.21~~

STOCK AVAILABLITY: 6 Working Days Approx

QS Supplies

2 Features Included In This Product Explained

Mains-Operated

Mains-operated devices work on electricity by plugging into electrical wall sockets. These require higher electrical energy and can't be operated using batteries as small batteries can't power the device. Large, non-portable electrical appliances are typically mains operated.

CE Certified Product

CE mark meets the prescribed safety, health and environmental protection requirements and all appropriate EU requirements. This mark is mandatory for products designed, made and sold in the European Economic Area.