Geberit Monolith Plus 480 x 1010mm Sanitary Module For Wall Hung WC

The Geberit Monolith Plus 480 x 1010mm Sanitary Module for Wall Hung WC has a flawless construction and visually pleasing design. It comes with dual flush actuation and can be adjusted for height up to 7cm if needed. The cistern is completely insulated, so it remains unaffected by moisture or condensation. Its odour extraction unit with ceramic honeycomb filter can be installed without tools. If you are looking for a WC framework for your renovation or new project or wish to replace an exposed cistern, this is the ideal solution. The unit also satisfies a host of other applications and gives them the advantage of working with low voltage, no mains voltage in the cistern, thereby saving energy.

• Compensation of dimensional tolerances possible
• Height adjustable up to 7 cm
• Fastening height WC ceramic appliance 35 to 1 cm
• Cistern, fully insulated against condensation
• Application purposes
• For renovations, conversions and new buildings
• For wall inlets with inlet height of less than 23 cm
• For replacing low-level exposed cisterns
• For replacing wall-hung WCs with close-coupled exposed cistern
• For Geberit AquaClean WC complete solutions
• For connecting Geberit AquaClean WC enhancement solutions with accessories
• For mounting on finished floors
• For installation in front of drywalls or solid walls
• For compensating the offset between WC connections and wall drains, using a stepped straight connector for wall-hung WCs
• The ceramic honeycomb filter for odour neutralization can be replaced without tools
• The odour extraction unit automatically switches off after a predefined running time
• Operation with extra-low voltage, no mains voltage in the cistern
• Mains connection with flexible three-wire sheathed cable
• Water supply connection on the bottom
• Water supply connection on the left/right possible with accessories
• Protection degree - IPX4
• Protection class - I
• Nominal voltage - 100-240 V AC
• Mains frequency - 50-60 Hz
• Operating voltage - 4.1 V DC
• Power consumption - 5 W
• Flow pressure - 0.1-10 bar
• Maximum operating temperature, water - 25 °C
• Flush volume - 6 litre
• Flush volume small - 3 litre
• Scope of delivery
• Water supply connection set with two angle stop valves, 1/2
• Flush bend extension 160 mm
• Sleeve made of EPDM, diameter 44 / 55 mm
• Straight connector made of PE-HD, diameter 90 mm
• Adaptor socket made of PE-HD, diameter 90 / 110 mm
• Two threaded rods M12
• Base cover
• Six fastening pins
• Support frame
• Female socket for mains connection
• Power supply unit
• Fastening material for drywall
• Fastening material