Geberit Monolith Plus 505 x 1140mm Sanitary Module For Wall Hung WC

Geberit Monolith Plus 505 x 1140mm Sanitary Module For Wall Hung WC.

• The manufacturing code of this product is 131.188.00.7
• Size: Width 505mm x Depth 106mm x Height 1140mm
• Odour extraction with a ceramic honey comb filter can be activated
• Odour extraction unit with run-on function
• Operation with extra-low voltage, no mains voltage in the cistern
• Mains connection with flexible three-core sheathed cable
• Water supply connection on the bottom
• Water supply connection on the left/right possible with accessories
• Compensation of dimensional tolerances possible
• Height-adjustable up to 7cm
• Fastening height WC ceramic appliance 35 ± 1 cm
• Self-supporting
• Protection degree: IPX4 rated
• Protection class: I
• Nominal voltage: 100-240 V AC
• Mains frequency: 50-60 Hz
• Operating voltage: 12 V DC
• Power consumption: 15W
• Power consumption standby: ≤ 0.5 W
• Flow pressure: 0.1-10 bar
• Maximum operating temperature water: 25 degrees Celsius
• Flush volume factory setting 6 and 3 litres
• Flush volume large adjustment range 4-6 litres
• Flush volume small 3 litres
• Calculated flow rate: 0.11 l/s
• Minimum flow pressure for calculated flow rate: 0.5 bar
• Refer to the technical drawing for more details
• Application Purposes:
• For renovations, conversions and new buildings
• For wall inlets with inlet height > 23 cm
• For replacing low-level exposed cisterns
• For replacing wall-hung WCs with close-coupled exposed cistern
• For Geberit AquaClean WC complete solutions
• For connecting Geberit AquaClean WC enhancement solutions with accessories
• For mounting on finished floors
• For installation in front of drywalls or solid walls
• For compensating the offset between WC connections and wall drains, using a stepped straight connector for wall-hung WCs
• Scope Of Delivery:
• Water supply connection set with 2 angle stop valves, 1/2 Inch
• Flush bend extension 160mm
• Sleeve made of EPDM diametre 44 / 55mm
• Straight connector made of PE-HD diameter 90mm
• Adaptor socket made of PE-HD diametre 90 / 110mm
• 2x threaded rods M12
• Sound insulation set
• Female socket for mains connection
• Power supply unit
• Fastening material
• Base cover
• Fastening material for drywall