Geberit Monolith 505 x 1140mm Sanitary Module For Wall Hung WC

Marvellous visual appeal, contemporary features, and sheer luxury are the hallmarks of Geberit products. Here is a model that is ideal for the hanging of WC units. The sanitary module includes a cistern that is fully insulated against condensation with dual flush functionality. Made from quality material, the product is long-lasting and designed with a side cladding made of brushed aluminium. The self-supporting unit has a water supply connection at the bottom.

• Manufacturing code of this product: 131.185.00.5
• Size [mm]: 505mm x 1140mm [Width x Height]
• Size [cm]: 50.5cm x 114cm [Width x Height]
• Thickness: 106mm (10.6cm)
• Compensation of dimensional tolerances possible
• Height-adjustable up 70mm (7cm)
• Fastening height WC ceramic appliance: 35 ± 1 cm
• Cistern, fully insulated against condensation
• Self-supporting
• Water supply connection on the rear centre
• Water supply connection on the left/right possible with accessories
• Water supply connection on the bottom
• Flow pressure: 0.1-10 bar
• Maximum operating temperature, water: 25 °C
• Flush volume, factory setting: 6 and 3 l
• Flush volume large, adjustment range: 4.5 / 6 l
• Flush volume small : 3 l
• Calculated flow rate: 0.11 l/s
• Minimum flow pressure for calculated flow rate: 0.5 bar
• Refer to the technical drawing for more specifications
• Please refer to the Care instruction PDF from the Additional Info section for more details
• Application Purposes :
• For renovations, conversions and new buildings
• For wall inlets with an inlet height of 230mm
• For replacing low-level exposed cisterns
• For replacing half-high level exposed cisterns
• For replacing wall-hung WCs with close-coupled exposed cistern
• For replacing wall-hung WCs with a pressure-flushing valve
• For Geberit AquaClean WC complete solutions
• For replacing wall-hung WCs with concealed cisterns with maximum
• Service opening height: 1090mm
• For connecting Geberit AquaClean WC enhancement solutions with
• accessories
• For mounting on finished floors
• For installation in front of drywalls or solid walls
• For compensating the offset between WC connections and wall drains, using a stepped straight connector for wall-hung WCs
• Scope Of Delivery :
• Water supply connection set with two angle stop valves, 1/2inch
• Flush bend extension 160mm
• Sleeve made of EPDM, Ø44 / 55 mm
• Straight connector made of PE-HD, Ø90 mm
• Adaptor socket made of PE-HD, Ø90 / 110 mm
• 2x threaded rods M12
• Base cover
• 6x fastening pins
• Support frame
• Fastening material for drywall
• Fastening material for installation in front of concealed cisterns
• Fastening material