Mira Evoco Dual Bathfill Thermostatic Mixer Shower

Simply upgrade your bath and shower with the installation of this Mira Evoco Dual Bathfill Thermostatic Mixer Shower. The kit comes with a bath filler, shower handset, slider rail, and hose. The valve automatically adjusts the temperature to keep the water temperature stable and within safe limits.

The handset makes a fine finish in this convenient kit, while Mira Magni-flo™ technology enables higher flow compared to standard kits, even when temperatures are low. Installation is fast and simple, thanks to the integrated push-fit connections and spanner-free installation. The unit is known for its modern design and innovative features. It is an exceptionally hard-to-miss product.

• Manufacturing code of this product: 1.1967.005
• It comes in a chrome finish
• Thermostatic temperature stability
• Integrated push-fit connections already included
• Spanner free installation
• Mira’s innovative installation system providing a simple first-fix solution
• Protective cover to minimise damage between first and 2nd fix
• A flushing system was provided to test connections prior to tiling
• Suitable for the rear wall and noggin installations
• Works on all systems, even at low pressure
• Separate flow and temperature controls using button actuation
• Maximum temperature stop for increased safety (with override for a hotter shower)
• Choose your outlet - intuitive push button technology allows you to select the handset, bath fill or both
• One spray 110mm (11cm) Handheld with rub-clean nozzles
• 1250mm (125cm) flexible shower hose
• Temperature control type: Thermostatic
• Flow actuation: Push-button
• Water entry points: Bottom only
• Inlet connections: Direct 15mm (1.5cm) push-fit connections
• Outlet connections: 15mm (1.5cm) copper pipework
• Reversed inlets supported: No = hot left, cold right only
• Flow rate at 0.5 bar: 8.24 l/min (at Handset), 8.98 l/min (at Bath filler)
• Flow regulator: 9 l/min (supplied with product - x2)
• Temperature stability: ± 2°C
• Factory set to safe maximum temperature
• Adjustable maximum temperature for on-site conditions
• Cold water range: 1°C to 25°C
• Hot water range: Min 55°C; 60°C - 65°C (recommended)
• Minimum maintained pressure (gas water heater): 1 bar (10-metre head)
• Minimum maintained pressure (gravity system): 0.1 bar (1-metre head)
• Maximum maintained pressure: 5.0 bar (50-metre head)
• Maximum static pressure: 10.0 bar (100-metre head)
• Refer technical drawing for more details