Mira React Plus Deck Mounted Bath Filler Tap

Mira React Plus Bath Filler Tap is a deck-mounted contemporary controller for the bathroom. This KIWA UK, WRAS, and TMV2-approved product is made of solid brass that is rust, stain, and scratch resistant and extremely durable. This bath shower filler has a shiny chrome finish that will match most colours and designs, especially your current one.

It comes with easy-fit elbows and integrated supply isolation and mounts horizontally. It is ideal for deck-mounted installation and works well with all systems, even those with low pressure. Mira Cool Shield keeps the valve cool to the touch, and Thermostatic temperature stability adds peace of mind. Suitable to use with all types of baths.

• Manufacturing code of this product: 1.1900.026
• It comes in a chrome finish
• Size [mm]: 300mm x 200mm [Width x Depth]
• Size [cm]: 30cm x 20cm [Width x Depth]
• Inlet centres: 180mm (18cm)
• Suitable for deck-mounted installation
• Thermostatic temperature stability
• Compatible with all systems, even at low pressure
• Separate flow and temperature controls
• Deck mount elbows allow bath-edge installation
• Temperature control has a maximum temperature stop for increased safety (with an override for a hotter bath)
• Deck mounted easy fit elbows support 2nd fix valve installation
• Standard 180mm (18cm) centres for the replacements of existing Bath Shower Mixers
• Inlet connections: 3/4 inch BSP male under bath connections to pipework; 3/4 inch BSP connection to a mixer shower
• Integrated bi-directional 1/4 turn full-bore ball valve isolators:
• Saves time and resources when conducting in-service cold failure testing to comply with TMV 2
• Saves time and resources for in-service maintenance (i.e cleaning filters and not having to remove bath panel)
• No specialist tools required: Easily isolate the water supply using a flathead screwdriver or hex key
• Temperature control type: Thermostatic
• Flow control type: Ceramic
• Flow rate (at bath outlet): 15 l/min at 0.6 bar
• Temperature stability: ± 2°C
• Factory set to safe max temp: 39°C at maximum temperature stop, 46°C using override
• Adjustable maximum temperature for on-site conditions
• Patented Mira Iso-Pro™ technology - Safety check for TMV2 maintenance is quick and easy
• Cold water range: 1°C to 25°C
• Hot water range: Min 55°C; 60°C - 65°C (recommended)
• Minimum maintained pressure (gas water heater): 1 bar (10-metre head)
• Minimum maintained pressure (gravity system): 0.1 bar (1-metre head)
• Maximum maintained pressure: 5.0 bar (50-metre head)
• Maximum static pressure: 10.0 bar (100-metre head)
• Refer to the technical drawing for more details