Vado I-Tech Life Infra-Red Deck Mounted Chrome Mono Basin Mixer Tap

Vado Itech IR-100/LIF-C/P Details

Introduce a touch of elitist exclusivity in your bathroom by installing the Vado I-Tech Life Infra-Red Deck Mounted Chrome Mono Basin Mixer Tap. This mixer is moulded out of a single piece of brass attractively updated with chrome polish, which emanates glitter and glow, giving an ethereal aura to the entire surroundings. Chrome finished deck mounted beauty is fantastically poised on the basin, to increase the sporting look. The performance is vital as it runs on mains or battery, when power fails. This sensational component is easy to install and backed by a guarantee of 5 years from Vado.

The manufacturing code of this product is - IR-100/LIF-C/P
It comes in a chrome finish
Deck mounted installation
Size [mm]: Ø54.5mm x 158mm x 140mm [Width x Depth x Height]
Size [cm]: Ø5.45cm x 15.8cm x 14cm [Width x Depth x Height]
Mains or battery operated
It comes with rub clean aerator
Runs on standard AA batteries
Easy to install
Requires minimum 1.0 bar operating pressure
Suitable for high water pressure system
WRAS approved
Download the installation instruction PDF file from the additional info section
Refer to the technical diagram for complete size details
Carries five years guarantee against any manufacturing defects

Info / Size (mm)

Tap
Pipe Centre: 120.50 mm

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Water Activation
: By Motion Sensor
⤷ Range
: Life
⤷ Tap Body Shape
: Square
⤷ Colour
: Chrome
⤷ Warranty/Guarantee
: 5 Years
⤷ Installation Type
: Deck Mounted
⤷ Valve/Cartridge Type
: Ceramic Disc
⤷ Base To Spout
: 117

⤷ Width
: 54.5
⤷ Inlet Connections
: 1/2-Inch
⤷ Minimum Operating Pressure (Bar)
: 1.0
⤷ Flow Rates (l/min)
: 3 bar at 13 l/m
⤷ Sensor Type
: Infrared
⤷ Compliance/Approvals/Standard
: WRAS
⤷ Barcode
: 5052120110409
⤷ Product Type
: Sensor Basin Tap

Additional Info & Downloads

Download the Installation And Care Instructions Pdf File

Vado I-Tech Life Infra-Red Deck Mounted Chrome Mono Basin Mixer Tap

£384.30

RRP: ~~£630.00~~

STOCK AVAILABLITY: 3 Working Days Approx

QS Supplies

3 Features Included In This Product Explained

Mains-Operated

Mains-operated devices work on electricity by plugging into electrical wall sockets. These require higher electrical energy and can't be operated using batteries as small batteries can't power the device. Large, non-portable electrical appliances are typically mains operated.

High Water Pressure

Water systems operating at 1.0 bar or higher pressure are considered high-pressure systems. Products usually come labelled if they are suitable to use under such pressure.

WRAS Approved Product

WRAS Approval means that the particular water fitting or product complies with or meets the requirements specified by the Water Supply (Water Fittings) Regulations or Scottish Byelaws.
Read more...

Questions & Answers

Submit Your Questions 1 Questions Answered

Have a question about this item? Ask our technical team. We aim to reply within 72 hours.

Lamberto Asked :
Is it ok to replace batteries on Tap sensors with an AC power adaptor? Please, recommend specifications needed for power adaptor to replace batteries. Thanks

Answered By QS Team

The IR-100/LIF-C/P should be mains powered as standard, and the batteries only to be used as a backup. The mains power cable and transformer would have been supplied in the box when purchased, so everything you need should already be present. You can also download installation and maintenance instructions from the Additional Info section of the product or click here.