Vado Chrome Pop-Up Bath Filler Waste And Overflow

James Asked :

I have quite a thin rim on the top edge of my bath. What is the minimum space required behind the bath? (The part you do not see).

Answered By QS Team

Please refer to the attached technical drawing for the details required.

Was this answer helpful?

Hylton Asked :

Please, can you advise what controller product options are compatible with the WG-81552-C/P to act as a filler for the bath?

Answered By QS Team

Any of the Vado valves can be used in conjunction with the WG-81552A-C/P for it to act as a bath filler.

Was this answer helpful?

Linda Asked :

Would you tell me if there is a Vado Valve to work with the Vado Synergie Bath Filler Waste And Overflow, which would give a decent flow rate at 0.2 bar pressure? I would love to have an overflow filler in our new bath; however, as we have low pressure (0.2), am I right to think that this is not really an option if the flow rate is any good? Can you suggest any particular valve and overflow filler or an alternative arrangement?

Answered By QS Team

Vado bath fillers with overflows: WG-81389-C/P and WG-81552A-CP both have a minimum operating pressure of 1.0 Bar. We wouldn’t recommend any less than that.

Was this answer helpful?

1 0

Linda Asked :

What is the flow rate for the Vado Overflow Bath Filler at 0.2 bar pressure?

Answered By QS Team

For the flow rate, please refer to the attached image.

Was this answer helpful?

2 0

Gemma Asked :

Can you tell me, can you change the water temperature and flow from this tap alone or is it meant to be controlled from another tap? I'm looking for a bath filler that works as a tap for temperature and flow. Please specify what accessories are needed to fit it.

Answered By QS Team

You cannot change the temperature and flow of this bath filler waste on its own. You would have to use a separate concealed shower valve, manual or thermostatically controlled or two 3/4-inch stop valves.

Was this answer helpful?

1 0

Tim Asked :

Could you please tell me if the 950mm dimension is nominal, and if so, what are the maximum-minimum sizes?

Answered By QS Team

We can confirm that the 950mm horizontal pipe has a maximum length of 950mm. This pipe has been designed to be cut down to the desired length if you require this to be shorter.

Was this answer helpful?

Helen Asked :

Do I need separate valves for the Vado Synergie bath filler and waste?

Answered By QS Team

Yes, you will need to purchase a separate valve and a bath filler waste.

Was this answer helpful?

2 1