Burlington Angled Deck Mount Birkenhead Handles Bath Mixer Tap With Regent Base

This exquisitely designed and impressively charming Angled Deck Mount Birkenhead Handles Bath Mixer Tap With Regent Base from Burlington will significantly enhance the beauty quotient of your bathroom. Made from high-quality brass and plated with adorable chrome, this tap comes with a flow straightener and an aerator. Burlington provides a 15-year guarantee on this bath shower mixer tap.

• Available in 2 variants: Full Turn, Quarter Turn
• Includes:- Angled Bath Shower Mixer with a standard cradle, 'S' adjuster, diverter handle, hose, ceramic telephone handset, deck mounting unions, 2 x Birkenhead handles and Regent large pair of tap bases
• Regent base taps are 3 cm higher than standard taps
• It comes in a chrome finish
• Deck-mounted installation
• Traditional design
• Spout swivels
• Height is 504mm (50.4cm)
• The centre of the inlet to the centre of the outlet is 130mm (13cm)
• Inlet centres: 300mm (30cm)
• G3/4-Inch inlet connections
• 1500mm (150cm) long shower hose
• The shower hose's internal diameter is Ø14mm (Ø1.4cm)
• Suitable for both low and high-pressure systems
• Requires a minimum of 0.1 bar of water pressure
• Compliance/Approval: BS 5412:1996, BS EN 200:2008
• Refer to the technical image for additional dimensional details
• Download the Installation Instruction PDF File from the Additional Info Section

Note: Bath shower mixer comes with an 'S adjuster'. This additional piece is inserted into a bath shower mixer via two Allen key fixings (Allen key is supplied). It has double recessed 'O' rings internally on both sides - this means that the 'S adjuster' can be installed at a fixed angle or in a semi-rigid manner. The 'S adjuster' is designed so that the last drips after using the telephone handset drip into the bath - not onto the tap ledge (this reduces cleaning and reduces mould and potential water ingress at the perimeter of the bath). If installed in a semi-rigid manner - you can swivel the 'S adjuster' left or right - to be parallel with the short side of the bath - so it is out of the way if two people are in the bath or you are showering in the bath. Every BSM is supplied with the 'S' adjuster in the box - so you can choose at the point of installation.