Menu
Rate this Item.:
Submit Your Questions 3 Questions Answered
Have a question about this item? Ask our technical team. We aim to reply within 72 hours.
db Asked :Can the flush be set to 4/2.5 flush? Or is it set to 4/2.5 Flush?
The cistern is set at 6/3 it can be changed to 4/2.5, but it was not WRAS approved for the 4/2.5.
Steve Asked :Good morning, Can you please confirm that the height of the soil spigot is 190 on centre? I have very little tolerance for an installation with a soil stack coming out of a wall that would be very difficult to change, and I don't know how much variance there is in this measurement. Regards Steve
We have provided the technical diagram above, which includes all the measurements. Hopefully, the above technical diagram will help.
P Asked :Is there room at the rear for side outlet?
Answered By Vic Can't be sure without trying the actual fitting., as I used a straight outlet. However with the pan against the wall the base sits 110 mm away from the wall.
The top of the outlet is approx. 250 mm off the floor. The point where the base begins to curve from vertical back towards the wall is approx 260 mm off the floor.
This should give clearance for the bend.
HTH
Vic Todman
We will soon verify the details and add your rating appropriately.