Nuie Beaumont Traditional Triple Concealed Thermostatic Shower Valve Chrome

Nuie Edwardian A3057 Details

Nuie Bathroom Beaumont Triple Concealed Traditional Thermostatic Shower Valve is ideal for family use; it has a high safety factor with anti-scald device and automatic shut down system in case of cold water supply failure. Suitable for all plumbing systems and requiring minimum 1.0 bar water pressure to function it has a flow rate of 5.5 litres per minute at 0.1 bar water pressure. Made in Britain, it is guaranteed for ten years by the manufacturer, against fabrication flaws, if any.

The manufacturing code of this product is A3057
Suitable for wall and recessed installation
1/4 turn ceramic disc cartridge
Size [mm]: 120mm x 280mm [Width x Height]
Size [cm]: 12cm x 28cm [Width x Height]
Pipe Size: 15mm (1.5cm) (1/2inch Bsp)
Number of outlet: 2
Separate controls for temperature and flow [operates two shower accessories separately or simultaneously: fixed head and slide rail kit, fixed head body jets or slide rail kit and body jets]
The minimum water pressure recommended for smooth working is 0.1 bar [LP-Low Pressure] and a maximum of 4.0 bar [HP-High Pressure]
The minimum flow rate is 5.5 litres per minute at 0.1 bar water pressure
Proudly made in Britain
Even if the water pressure fluctuates, the thermostatic valve control to +/- 2 to 3°C
Complete thermal protection to prevent scalding in the event of hot or cold water shut-off
In case of hot and cold water supplies come in the wrong way - no need for re-plumbing [ remove the cartridge, turn 180 degrees and replace]
Cartridge fitted is patented and is highly resistant to calcium build up even in hard water areas
Anti-scald - built-in anti-scald device allows hot water to be blended to a safe temperature and will shut down automatically in 1.5 seconds in case of cold water failure
Can be installed vertically or horizontally [portrait or landscape]
Suitable for shower pumps, combi boilers and gravity-fed systems
Excellent flow rates - even at low pressure
Flow rates (1/min): 0.1 Bar - 5.5, 0.5 Bar - 14, 1 Bar - 20, 2 Bar - 29, 3 Bar - 44
Ideal for unvented mains pressure systems
Suitable for all plumbing system
Suitable for low-pressure water system
Required 0.1 bar operating water pressure
The technical drawing is available for more technical details
Download the Customer Data Sheet and Installation Instruction PDF file from the Additional Info Section

Technical Specifications

Please note all the measurements are in 'mm'

⤷ Range
: Beaumont
⤷ Colour
: Chrome
⤷ Warranty/Guarantee
: 5 Years
⤷ Material
: Brass
⤷ Theme
: Traditional
⤷ Installation Type
: Wall Mounted
⤷ Overall Height
: 280
⤷ Minimum Operating Pressure (Bar)
: 0.1
⤷ Flow Rates (l/min)
: 0.1 bar - 5.5
⤷ Handle Style
: Lever | Crosshead
⤷ WRAS Approved
: Yes
⤷ Temperature Control
: Thermostatic
⤷ Backplate Width
: 120

⤷ Backplate Height
: 280
⤷ Anti-Scald
: Yes
⤷ Number of Handles
: 3
⤷ Orientation
: Vertical | Horizontal
⤷ Barcode
: 5055369030798
⤷ Plumbing System Compatibility
: Suitable For Shower Pumps | Combi Boilers And Gravity-Fed Systems
⤷ Plumbing Option
: Concealed
⤷ Maximum Operating Pressure (Bar)
: 4
⤷ Concealed Body Included
: Yes
⤷ Cartridge Included
: Yes
⤷ Cartridge Type
: 1/4 Turn Ceramic Disc
⤷ Separate Flow and Temperature Controls
: Yes

Additional Info & Downloads

Download the Customer Data Sheet Pdf File Download the Installation Instruction Pdf File

Nuie Beaumont Traditional Triple Concealed Thermostatic Shower Valve Chrome

£203.89

RRP: ~~£604.00~~

IN-STOCK

Delivery in 4 Working Days Approx.

QS Supplies

8 Features Included In This Product Explained

Thermostatic Control

Thermostatic shower control works behind the scenes to achieve or maintain water temperature output from a showerhead. With the built-in safety feature, the shower provides a consistent water temperature.
Read more...

Combi-Boiler System

The showerhead or shower system is suitable for use with a Combi-Boiler System. This system heats cold water on demand, relying solely on mains pressure to move water around your home. These are suitable for mixer showers, as they provide hot water instantaneously and at the highest pressure.

Unvented System

The unvented water systems usually have a separate hot water cylinder, which is pre-heated via a combi boiler or other heating sources to store a quantity of hot water at mains pressure.

TMV2 Approved Product

TMV2 is an independent certification for thermostatic mixers, including shower valves, run by BuildCert that ensures national and international standards as specified under (BS EN 1111 and 1287) are met. These standards detail the exacting requirements that a thermostatic valve or product must comply with to guarantee a high thermostatic protection and safety standard. Products meeting this requirement carries the logo and protect against any scalding accidents.

TMV3 Approved Product

TMV3 approval means a thermostatic valve is certified and approved for use in healthcare and commercial situations.

WRAS Approved Product

WRAS Approval means that the particular water fitting or product complies with or meets the requirements specified by the Water Supply (Water Fittings) Regulations or Scottish Byelaws.
Read more...

Ceramic Disc Cartridge

It has two ceramic discs, one fixed in place and the other moveable with the tap or valve handle. It is the most common technology used in modern tapware as it offers unmatched advantages such as no leaks and drips and saves on water and money.
Read more...

Low Water Pressure

Water systems operating at a pressure between 0.1 and 0.4 bar are considered low pressure. Products usually come labelled if they are suitable to use under such pressure.
Read more...

Questions & Answers

Submit Your Questions 1 Questions Answered

Have a question about this item? Ask our technical team. We aim to reply within 72 hours.

David Asked :
How do I increase the flow rate on my A3057 Ultra thermostatic shower?

Answered By QS Team

Unless a shower pump is installed, the only other way to increase the flow slightly would be to take the non-return valves from the valve. These are located behind the brass hexagon nuts on the body. The faceplate would need to be removed. I hope this helps.