Geberit Sigma10 Pneumatic Urinal Flush Control

The Sigma10 Pneumatic Urinal Flushing Control comes to you from Geberit, the leaders in quality bathroom products. It is a contemporary accessory made for the manual flush actuation of urinals and allows a comfortable action. Used as part of the assembly process when installing a urinal set. It functions even with low actuation force and activates when the button is released. It is included with a securing bar and performs superbly with a minimum water pressure of 1 bar and is presented in a range of brilliant finishes.

• Size [mm]: 130mm x 130mm [Width x Height]
• Size [cm]: 13cm x 13cm [Width x Height]
• Flush plate made of plastic and stainless steel [Refer Option]
• Flush plate with securing bar
• Short stroke movement
• Flush volume can be reduced to 0.5 l per flush with regulating screw of an installation set
• Flow pressure 1-8 bar
• Maximum test pressure, water 16 bar
• Maximum test pressure, air / inert gas 3 bar
• Relative humidity < 100 %
• Maximum operating temperature, water 30 °C
• Actuation force < 12 N
• Flow rate at 1 bar without flow limiter 0.3 l/s
• Flow rate at 1 bar with flow limiter 0.24 l/s
• Calculated flow rate 0.3 l/s
• Minimum flow pressure for calculated flow rate 1 bar
• Flush time, adjustment range 4/8/12 s
• Application purposes
• For manual flush actuation of urinals
• For Geberit frames for urinal with front actuation
• For installation in installation sets for Geberit urinal flush controls
• Scope of delivery:
• Flush plate type 10
• Pneumatic flush actuation, pre-mounted on the mounting frame
• Pneumatic valve
• Fastening material
• Refer to the technical diagram for the complete technical dimension
• Please refer installation guide PDF below for more instructions
• Refer to Product Variations Info & MFC Code below for more details